Bathroom-grade gel coats

Bathroom-grade gel coats

Bathroom-grade gel coats, most of which are benzene-type unsaturated polyester gel coats, are specially used for fibreglass bathroom products: bathtubs, shower floor basins, washbasins, bathroom wall panels, etc. This bathroom gel coat takes into account beauty, hot water resistance, and bathroom detergent resistance.

● Hot water resistance: This bathroom gel coat can withstand repeated soaking in hot water for a long time, withstand high temperature and moisture, and is not easy to foam and delayer.

● Chemical resistance: resistant to shower gel, toilet cleaner, all kinds of bathroom cleaners, not easy to be corroded and discoloured.

● The surface is high-gloss and delicate: the moulding surface is as smooth as jade, with few pores, easy to scrub, and stains are not easy to adhere.

● Anti-hydrolysis: In the long-term high-humidity environment of the humid bathroom, the coating of bathroom gel coat is stable and not easy to powder and whiten.

● The hardness is moderate and can be polished and repaired: slight scratches on bathroom gel coat can be polished and repaired.

● Main uses: bathtub, shower room basin, washbasin, bathroom wall panel

Bathroom Gel Coat Technical Specifications

Viscosity	Gel Time (25℃)
7000 mPa·s	8 min

Process & Logistics & Packaging

Process

Suitable for hand brushing and spraying

Conditions

Temp 18°C-25°C. Humidity<70%.

Curing

MEKP (1.5%-2.5%).

FAQ Accordion

Q: Can samples be provided for trial use?

A: Yes, Small batches of 1-2kg products are available for trial.

Q: Can it be applied to outdoor products?

A: Absolutely applicable

Q: What is bathroom gel coat and where can it be applied?

A: Bathroom gel coat is a reinforced resin surface coating. It is widely used for shower trays, bathtubs and bathroom wall panels. It forms a smooth, waterproof layer to resist moisture and daily scratches in wet bathroom environments.

Q: What advantages does your bathroom gel coat have over ordinary coatings?

A: Our bathroom gel coat features good water resistance and stain resistance. Its finished surface is easy to clean and maintain. It also shows stable color retention and can effectively prevent blistering or peeling under long-term humid bathroom conditions.

Q: Can your bathroom gel coat match custom colors for bathroom projects?

A: Yes, we support custom color matching for bathroom gel coat. You can provide color samples or color codes. Our technical team will adjust formulas to meet your requirements for bathtubs, shower bases and other bathroom component production.

Q: What is the curing process of bathroom gel coat during production?

A: This bathroom gel coat cures at room temperature with matched curing agents. It needs proper spraying thickness and sufficient curing time before laminating. Operators should follow our technical guide to avoid surface defects on bathroom products.

Q: Is your bathroom gel coat suitable for hand lay-up or spray application?

A: Our bathroom gel coat works well for both spray and hand lay-up processes. It has good thixotropy to prevent sagging on vertical bathroom mould surfaces. It delivers consistent surface quality for large-volume bathroom sanitary ware manufacturing.

Q: What storage conditions should we follow for bathroom gel coat?

A: Store bathroom gel coat in a cool, dry place away from direct sunlight and high temperature. Keep the container tightly sealed after use. Proper storage can maintain its stability and avoid premature gelation before your sanitary ware production.